ETC Foundry DIN Relay 12, 12-channel DIN rail

The Foundry DIN Relay 12 is an all-in-one, cost-effective, relay-only DIN-rail power switching solution designed for work lights, house lights, lobby lighting, architectural loads, and LED-only lighting systems.
The unit provides 12 independent 16 amp switching channels in a compact DIN-rail form factor. Configuration via NFC enables setting changes without applied power. Local mechanical override switches allow manual control of each output during commissioning and service.
Designed around standard DIN-rail switchgear architecture, the Foundry DIN Relay 12 can be installed in off-the-shelf DIN enclosures or integrated into custom DIN-rail cabinets to meet the project requirements.

FEATURES
• 12 channels of power switching
• Manual mechanical relay override
• 16 A capacitive load per channel
• RDM configuration via DMX512-A
• NFC configuration via ETC Set Light app

CONTROL
• DMX controlled relay outputs
• Channel addressing via RDM or NFC (Set Light app)
• Configurable DMX loss behavior and timing
• DMX loss preset

USER INTERFACE
• 2x LEDs (Power, Data)
• 12x Mechanical relay override switches (retains override state until new DMX state is received)
• Configuration by RDM or NFC via Set Light app

ELECTRICAL
• Mains power input: 100–230 V AC, 50/60 Hz, 0.2 W standby
- 0.5–4.0 mm² (stranded wire) or 0.5–6.0 mm² (solid wire)
• 12x Relays, latching, single pole
• 16 A maximum load per relay
• Relay electrical operational ratings
- 50 A resistive 100,000 operations
- 20 A incandescent lamp 30,000 operations
- 16 A electronic ballasts 6,000 operations
- 16 A electric motor 3,000 operations
- 0.5–4.0 mm² (stranded wire) or 0.5–6.0 mm² (solid wire)
• DMX / RDM input

ENVIRONMENTAL
• Ambient temperature: 0°C–40°C
• Relative humidity: 20–85% non-condensing

WARRANTY
• 5 years