ETC Response Opto-Splitter-12 Port XLR Rack-mount
Art.nr
222028202
Art.nr leverantör:
4267A1032
RSN-OPTO-12O
The ETC Response Opto-Splitter provides quality and reliable DMX data distribution.
Using industry-standard DMX and RDM, the Response Opto-Splitter unlocks the power of
your DMX system.
FEATURES
Multi-port DMX splitter with DMX-in and DMX-thru
Optically isolated DMX512 ports
Supports Remote Device Management (RDM) Protocol
DIN rail and rack-mount versions
Power and DMX presence status indicators
Supports update of connected ETC fixtures
FUNCTIONAL
No configuration required
Supports DMX512, DMX512 (1990), and DMX512-A
Supports ANSI E1.20 Remote Device Management (RDM)
MECHANICAL
Rack-mount form factor:
- Fabricated from aluminum
- Black, Fine-textured, powder-coat finish
- Full 19 equipment rack width
- Front or rear facing mounting options
Power and data activity LED indicators
- Blue power indicator
- Green DMX activity indicator
ENVIRONMENTAL
Ambient operating temperature: -10° to 65°C
Operating humidity: 5% - 95% non-condensing
Storage temperature: -40° to 70°C
ELECTRICAL
Supports DMX input and DMX thru
Provides optically isolated DMX/RDM outputs
Rack-mount form factor:
- 100-230VAC power input
- User configurable front or rear power position
- 35W max power draw
- XLR, RJ45 and Terminal connector options
ADDITIONAL INFORMATION
DMX512
Often shortened to DMX (Digital Multiplex), this communicationprotocol is used mainly to
control dimmers and multi-parameter fixtures. A universe of DMX is defined as 512 channels.
DMX sends a nearly continuous stream of level information for each control channel.
It is a form of RS-485 digital serial communication.
RDM
Remote Device Management (ANSI E1.20) is a protocol enhancement to DMX512 that allows
low-speed bidirectional communication between a system controller and attached RDM
devices over a standard DMX line.
This protocol allows remote configuration, status monitoring, and management of devices.
Using industry-standard DMX and RDM, the Response Opto-Splitter unlocks the power of
your DMX system.
FEATURES
Multi-port DMX splitter with DMX-in and DMX-thru
Optically isolated DMX512 ports
Supports Remote Device Management (RDM) Protocol
DIN rail and rack-mount versions
Power and DMX presence status indicators
Supports update of connected ETC fixtures
FUNCTIONAL
No configuration required
Supports DMX512, DMX512 (1990), and DMX512-A
Supports ANSI E1.20 Remote Device Management (RDM)
MECHANICAL
Rack-mount form factor:
- Fabricated from aluminum
- Black, Fine-textured, powder-coat finish
- Full 19 equipment rack width
- Front or rear facing mounting options
Power and data activity LED indicators
- Blue power indicator
- Green DMX activity indicator
ENVIRONMENTAL
Ambient operating temperature: -10° to 65°C
Operating humidity: 5% - 95% non-condensing
Storage temperature: -40° to 70°C
ELECTRICAL
Supports DMX input and DMX thru
Provides optically isolated DMX/RDM outputs
Rack-mount form factor:
- 100-230VAC power input
- User configurable front or rear power position
- 35W max power draw
- XLR, RJ45 and Terminal connector options
ADDITIONAL INFORMATION
DMX512
Often shortened to DMX (Digital Multiplex), this communicationprotocol is used mainly to
control dimmers and multi-parameter fixtures. A universe of DMX is defined as 512 channels.
DMX sends a nearly continuous stream of level information for each control channel.
It is a form of RS-485 digital serial communication.
RDM
Remote Device Management (ANSI E1.20) is a protocol enhancement to DMX512 that allows
low-speed bidirectional communication between a system controller and attached RDM
devices over a standard DMX line.
This protocol allows remote configuration, status monitoring, and management of devices.
Beställningsvara
18 780 kr
Art.nr | 222028202 |
---|---|
Art.nr leverantör | 4267A1032 |