Luminex LumiCore 64

LumiCore allows you to merge and route up to 64 x 4 input
sources toward 64 newly defined universes. This way, LumiCore
becomes the ideal solution to isolate your control setup on a
festival, a theater or in a TV studio.
As technology is evolving towards full networked solutions
(ArtNet or sACN directly to the fixtures), LumiCore provides all
the flexibility of the LumiNode but then directly on the network,
with up to 256 input universes merged and routed towards max
128 output universes. All of this with extreme low latency

The engine technology allows you to merge in HTP, LTP, Backup,
Switch, Crossfade or custom mode, with different triggers that
can be assigned even on a per channel basis.
In large pixel mapping applications LumiCore is the ideal bridge
to merge different control sources into new network streams.

LUMICORE
KEY FEATURES
• Mount one or two units in a 1U rack space
• The unit is robust and thus ideal for touring applications
• 64 processing engines.
• The M10 insert and safety ear make it easy to mount it safely on a truss

Rack or truss mountable half 19” unit
• RGB LED for activity indication
• 2 x EtherCon network port @ 1Gbps with integrated switch
• Link/Speed LED indication per Ethernet port
• RGB Mode LED indication per Ethernet port
• Color display and control jog for fast conguration
• Contact closure as trigger
• PoE powered (IEEE 802.3af)
• Internal universal power supply with Neutrik PowerCon True1
• Robust steel enclosure with M10 insert and protection ears

Examples:

With its split interface possibilities LumiCore allows you to isolate
your lighting rig LAN from the IT infrastructure. This allows you
to monitor your control infrastructure from the IT department
and to centralize show storage on IT side meanwhile sharing
these resources over several studios. LumiCore acts as a real
bridge and can be deployed in a fully redundant way

The main house controller(s) and the lighting rig is controlled
via universe 1001 – 1128 (128 universes). All the guest consoles
are isolated from the rig by sending out universe 1-128.
The main console is setup as trigger source to switch between
the different guest sources coming in on the LumiCore and
defining who can control the rig (and even which part if split in
different trigger channels).
The LumiCore will stream the resulting universes toward the
stage lighting rig. Here LumiNode’s can convert, if needed,
the universes to DMX. The LumiNode’s still acts as your RDM
link to your DMX/RDM fixtures. In this way Araneo monitoring
software and LumiNet Monitor can be used by the house
technicians without releasing this data to the guest consoles.