RC4 LumenDim6, 6-Channel CRMX Dimmer
Art.nr
254001009
Art.nr leverantör:
LD6
Wireless low-voltage, high-power, 42A DMX-controlled 6-channel dimmer for
theatre and motion picture.
Control LEDs & lamps in props, large set pieces, and more. Genuine LumenRadio CRMX technology,
compatible with all CRMX devices widely used in the motion picture industry.
The LumenDim6 is a 42A high-power 6-channel DC dimmer for props,
turntables, set pieces, and more.
It smoothly dims LEDs and lamps, controls small DC motors
with wide-range speed control, and provides many features to
optimize color and appearance for a variety of theatre and motion-picture applications.
It operates from 6VDC to 35VDC with low heat generation and maximum energy efficiency.
All RC4 Series 3 products now include 19-bit dimming, which is eight times finer
than 16-bit with 524,000 steps of resolution.
This means exceptionally smooth LED dimming, especially at the bottom end of
the curve where other dimmers appear steppy and jumpy.
The LumenDim6 also features dimmer curve tweaking to find the most
visually linear and pleasing response with any LED technology being used.
Device configuration is easily done with the built-in RC4 OneTouch user interface,
or Remote Device Management (RDM) via CRMX wireless link or the wired DMX port
using RDM controllers with E1.37 dimmer configuration capability and RDM sub-device support.
Dimensions: 112 x 62 x 31mm
Weight: 136g
Power Input: 6 - 35VDC, 0.5W, Anderson Powerpole connectors
Dimmer Outputs: 6 low-voltage DC dimmers, Anderson Powerpole connectors, 19-bit resolution PWM (524,000 steps)
Output Power, per Dimmer: 15A non-continuous, 10A continuous
Maximum Total Power Handling: 42A (limited by safety rating of Anderson connectors)
Multiple PWM frequencies: 77Hz (high power), 615Hz (flicker free), 5kHz (artifact free for video), 20kHz (noise free for audio), 40kHz (super-slow-motion video)
Multiple Dimmer Curves: Non-Dim, Non-Dim Inverted, Linear, Linear Inverted, Inverse-Square-Law (ISL), ISL inverted, servo motor pulse clockwise (CW), servo motor pulse counter-clockwise (CCW), AC wave (ring telephone bells)
DMX Input/Output: RC4 3.5mm mini, USITT DMX512/1990 data, non-standard port, connector adaptors available. RDM E1.20 and E1.37 (dimmer configuration) support
Wireless DMX Protocol: LumenRadio CRMX
RF Antenna: RP-SMA external, omnidirectional. Alternate antennas can be used for increased sensitivity
theatre and motion picture.
Control LEDs & lamps in props, large set pieces, and more. Genuine LumenRadio CRMX technology,
compatible with all CRMX devices widely used in the motion picture industry.
The LumenDim6 is a 42A high-power 6-channel DC dimmer for props,
turntables, set pieces, and more.
It smoothly dims LEDs and lamps, controls small DC motors
with wide-range speed control, and provides many features to
optimize color and appearance for a variety of theatre and motion-picture applications.
It operates from 6VDC to 35VDC with low heat generation and maximum energy efficiency.
All RC4 Series 3 products now include 19-bit dimming, which is eight times finer
than 16-bit with 524,000 steps of resolution.
This means exceptionally smooth LED dimming, especially at the bottom end of
the curve where other dimmers appear steppy and jumpy.
The LumenDim6 also features dimmer curve tweaking to find the most
visually linear and pleasing response with any LED technology being used.
Device configuration is easily done with the built-in RC4 OneTouch user interface,
or Remote Device Management (RDM) via CRMX wireless link or the wired DMX port
using RDM controllers with E1.37 dimmer configuration capability and RDM sub-device support.
Dimensions: 112 x 62 x 31mm
Weight: 136g
Power Input: 6 - 35VDC, 0.5W, Anderson Powerpole connectors
Dimmer Outputs: 6 low-voltage DC dimmers, Anderson Powerpole connectors, 19-bit resolution PWM (524,000 steps)
Output Power, per Dimmer: 15A non-continuous, 10A continuous
Maximum Total Power Handling: 42A (limited by safety rating of Anderson connectors)
Multiple PWM frequencies: 77Hz (high power), 615Hz (flicker free), 5kHz (artifact free for video), 20kHz (noise free for audio), 40kHz (super-slow-motion video)
Multiple Dimmer Curves: Non-Dim, Non-Dim Inverted, Linear, Linear Inverted, Inverse-Square-Law (ISL), ISL inverted, servo motor pulse clockwise (CW), servo motor pulse counter-clockwise (CCW), AC wave (ring telephone bells)
DMX Input/Output: RC4 3.5mm mini, USITT DMX512/1990 data, non-standard port, connector adaptors available. RDM E1.20 and E1.37 (dimmer configuration) support
Wireless DMX Protocol: LumenRadio CRMX
RF Antenna: RP-SMA external, omnidirectional. Alternate antennas can be used for increased sensitivity
Beställningsvara
10 945 kr
| Art.nr | 254001009 |
|---|---|
| Art.nr leverantör | LD6 |