RC4 LumenDimM6-ST, 6-Channel Miniature CRMX Dimmer
Art.nr
254001008
Art.nr leverantör:
LDM6-ST
with simple screw terminals
Wireless low-voltage DMX-controlled 6-channel dimmer for theatre and motion picture.
Control LEDs & lamps in small props, costumes, and more.
Genuine LumenRadio CRMX technology, compatible with all
CRMX devices widely used in the motion picture industry.
The LumenDimM6 is a compact, easy to use, digitally secure,
battery-powered wireless DMX dimmer with an unprecedented six channels of power handling.
It smoothly dims LEDs and lamps, controls small DC motors with wide-range speed control,
and provides many features to optimize color and appearance
for a variety of theatre and motion-picture applications.
All RC4 Series 3 products now include 19-bit dimming, which is eight times finer than
16-bit with 524,000 steps of resolution.
This means exceptionally smooth LED dimming, especially at the bottom
end of the curve where other dimmers appear steppy and jumpy.
Device configuration is easily done with the built-in RC4 OneTouch user interface,
or Remote Device Management (RDM) via CRMX wireless link or the wired DMX port
using RDM controllers with E1.37 dimmer configuration capability and RDM sub-device support.
Dimensions: 80 x 40 x 20mm
Weight: 62g
Power Input: 6-35VDC, 0.5W, screw terminals
Dimmer Outputs: 6 low-voltage DC dimmers, screw terminals, 19-bit resolution PWM (524,00 steps)
Output Power, per Dimmer: 10A non-continuous, 5A continuous
Maximum Total Power Handling: 16A (limited by safety rating of input screw terminals)
Multiple PWM Frequencies: 77Hz (high power), 615Hz (flicker free), 5kHz (artifact free for video), 20kHz (noise free for audio), 40kHz (super-slow-motion video)
Multiple Dimmer Curves: Non-Dim, Non-Dim Inverted, Linear, Linear Inverted, Inverse-Square-Law (ISL), ISL inverted, servo motor pulse clockwise (CW), servo motor pulse counter-clockwise (CCW), AC wave (ring telephone bells)
DMX Input/Output: RC4 3.5mm mini, USITT DMX512/1990 data, non-standard port, connector adaptors available. RDM E1.20 and E1.37 (dimmer configuration) support
Wireless DMX Protocol: LumenRadio CRMX
RF Antenna: RP-SMA external, omnidirectional. Alternate antennas can be used for increased sensitivity and directionality
Control LEDs & lamps in small props, costumes, and more.
Genuine LumenRadio CRMX technology, compatible with all
CRMX devices widely used in the motion picture industry.
The LumenDimM6 is a compact, easy to use, digitally secure,
battery-powered wireless DMX dimmer with an unprecedented six channels of power handling.
It smoothly dims LEDs and lamps, controls small DC motors with wide-range speed control,
and provides many features to optimize color and appearance
for a variety of theatre and motion-picture applications.
All RC4 Series 3 products now include 19-bit dimming, which is eight times finer than
16-bit with 524,000 steps of resolution.
This means exceptionally smooth LED dimming, especially at the bottom
end of the curve where other dimmers appear steppy and jumpy.
Device configuration is easily done with the built-in RC4 OneTouch user interface,
or Remote Device Management (RDM) via CRMX wireless link or the wired DMX port
using RDM controllers with E1.37 dimmer configuration capability and RDM sub-device support.
Dimensions: 80 x 40 x 20mm
Weight: 62g
Power Input: 6-35VDC, 0.5W, screw terminals
Dimmer Outputs: 6 low-voltage DC dimmers, screw terminals, 19-bit resolution PWM (524,00 steps)
Output Power, per Dimmer: 10A non-continuous, 5A continuous
Maximum Total Power Handling: 16A (limited by safety rating of input screw terminals)
Multiple PWM Frequencies: 77Hz (high power), 615Hz (flicker free), 5kHz (artifact free for video), 20kHz (noise free for audio), 40kHz (super-slow-motion video)
Multiple Dimmer Curves: Non-Dim, Non-Dim Inverted, Linear, Linear Inverted, Inverse-Square-Law (ISL), ISL inverted, servo motor pulse clockwise (CW), servo motor pulse counter-clockwise (CCW), AC wave (ring telephone bells)
DMX Input/Output: RC4 3.5mm mini, USITT DMX512/1990 data, non-standard port, connector adaptors available. RDM E1.20 and E1.37 (dimmer configuration) support
Wireless DMX Protocol: LumenRadio CRMX
RF Antenna: RP-SMA external, omnidirectional. Alternate antennas can be used for increased sensitivity and directionality
Beställningsvara
9 295 kr
| Art.nr | 254001008 |
|---|---|
| Art.nr leverantör | LDM6-ST |